Drivetrain Components

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

Shimano Tourney CS-HG200-7 7-speed cassette Combinations: - 12 – 28T: 12-14-16-18-21-24-28T (bm) - 12 – 32T: 12-14-16-18-21-26-32T (bp)

SRAM's PG-730 7-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts throughout its 12-32 tooth range.

SRAM's PowerGlide PG-820 Cassette is a fine 8-speed cassette. It features steel cogs with SRAM's DuraBlast technology for smooth, precision shifting and excellent durability.

SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.

Live Long and Prosper Steel is real, so if you are pining for a 12 speed, direct mount chainring for your Cinch crankset that will stand up to years of kicking up dirt, cruising endless singletrack, smashing climbs, and everything in between, then look no further! Freedom Fighter Our Cinch interface makes this long-wearing steel direct mount chainring fast and easy to swap so you can customize your Shimano 12-speed drivetrain. Long-Hauler Stamped from real steel, this ring will keep going and going...and going. Plus, your 12-speed chain stays secure thanks to our awesome NW tooth profiling. - Compatible with Cinch Direct Mount Cranks - Steel - Direct Mount

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Material: Aluminum

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly - Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)

- Lightweight Design - Steel rings with engineering polymer spacers - Nickel finish - 7 Speed compatible - Weight - 248g

- 13-30T - Indexed Adjuster - Weight: 230g-270g

- 2:1 actuation ratio compatible with most Shimano 3x7/8sp drivetrains - Aluminum and steel construction with 11-tooth pulleys barrel adjuster

- Material: Heat-treated 4130 Chromoly - Splines: 8 - Diameter: 19mm - Length: 5.7/8" (150mm) - Spindle Bolts: 8x1mm (Included) - Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks

Shimano 105 5703 10-Speed chainrings are a quality, reliable replacement option for worn out chainrings on triple cranksets.

- Upper pulley has larger teeth for increased chain control

Shimano 105 FC-R7000 asymmetric 110 BCD chainrings for 2x11 drivetrains.

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48 - For seattube angles between 66 - 69 degrees

Altus wide link 7/8-speed compatible dual-pull multi-fit front derailleur for recreational off-road use. - Compact conventional swing design - Low-friction wide linkage reduces shifting effort and increases rigidity - Dual-pull design allows it to be used with top or bottom cable routing - Multi clamp band is compatible with all frame dimensions - 66-69 degree chainstay to seat tube angle range - For outer chainring size from 42 to 48 tooth, total capacity 20 teeth - Compatible with 7- or 8-speed drivetrains

Shimano BB-ES300 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

- HG technology has chamfered inner plates to optimise shifting performance on HG sprockets - Durability is assured through the heat treatment of rollers, pins, and plates - Includes connecting link - Weight: 335 grams

- For IG/HG chains - Zinc phosphate finish - Enlarged sprocket window design for ligtherweight - Refer to Documents and links to find the right product

Claris R2000 series 8-speed chainrings are a reliable option for long touring, town cruising, and daily commuting. - Direct replacement for R2000/R2030 cranks - Hyperglide technology ensures smooth and reliable shifting - Compatible with 4-arm crank design

Deore M6000 series 10-speed chainrings provide smooth and reliable shifting, ideal for off-road riding conditions. - Shimano HG-X technology - Compatible with 4-arm crank design