Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Bontrager Comp Stem
$29.99
Proper fit on your bicycle isn't just for the pros. Swap out the old stock stem on whatever bike you ride for the adaptable Bontrager Comp alloy stem. - Construction: 6061-T6 forged and welded body - Removable 2-bolt face plate - Opposing 2-bolt steerer tube clamp - Corrosion-resistant steel bolts - Suitable for road or mountain use - Safe for use on carbon steerer tubes and handlebars - 50mm stack height
Syntace Megaforce 2
$99.00
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
Bontrager Elite Blendr Stem
$64.99
The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer, and more with Blendr Elite accessory integration. - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Includes one Blendr base to integrate Ion lights and Trip computers
Bontrager RXL 7 Degree Factory Overstock Stem
$49.99 $89.99 44% Off
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
Bontrager XXX Blendr Stem
$275.00
OCLV Carbon construction of the XXX Blendr stem combines lightweight strength with a classy aesthetic. Captured titanium hardware ensures you never drop bolts again, and the dual-banded faceplate shaves weight and blends perfectly into mounted accessories with the Blendr integration system. - Ultra-light OCLV Carbon construction - Flush-fit 4-bolt dual band bar clamps offer seamless look - Captured Titanium screws save weight while making installation easy - Integrate accessories with included Blendr Mono Base and Blendr Ion and Garmin mounts - Mounts available for use with Ion and Trip, Garmin, GoPro, and SRM accessories - Approved for carbon bars and steerer tubes
Bontrager Elite Blendr Stem
$64.99
Stiff and light with the cleanest accessory solutions available When all you need is the right position, the Elite stem gets it done and more. The strong and light alloy stem is your bike's best workhorse and also features Blendr accessory integration for a sleek setup. Key features - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Safe for use on carbon steerer tubes and handlebars - Includes one Blendr base to integrate Ion lights and Trip computers.
Dimension 25.4mm Threadless Stem
$32.00
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
Bontrager XXX Integrated Road Handlebar/Stem
$599.99
The Bontrager XXX Integrated Handlebar/Stem is a one-piece carbon bar/stem combo that brings clean looks and light weight to any road bike. Lightweight 100% OCLV Carbon construction offers a great road feel and control, while calibration marks and a flat front surface ensure easy lever installation. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Product details - Seamless accessory integration with Blendr - Flat surface front of bar for clean cable routing - Calibration marks allow precise, accurate and repeatable brake lever position - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV Carbon construction - Internal relief channel eliminates need for additional spacer above stem - Safe for use with carbon and alloy steerer tubes - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
Electra Cruiser Aluminum Stem
$19.99
Electra's Cruiser Aluminum Stem is a stable, solid replacement for your original equipment. Designed to work with a 1-inch headset, the Cruiser Stem is made from no-frills aluminum that keeps off the weight while maintaining strength where you need it.
Ritchey WCS C220 73D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 73D Stem offers 17-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 73/17 degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Spank Spike Director 2 Stem
$49.90
- Proven alloy strength and security for racing or freeriding - 2D forged alloy body and wide, chamfered bar-clamps offer unparalleled support to handlebars, enhancing safety and longevity in your DH cockpit - Shot peened and anodized for high strength and low weight - CNC weight optimized for 31.8 bars - Key Technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy, CNC Weight Optimized - Length: (mm) 50 - Rise: (°) 15 - Diameter (mm): 31.8 - Stack Height (mm): N/A - Weight (g): ±150 - Finish: Shotpeen anodized, laser logos
Ritchey WCS Carbon Matrix C220 84D Stem
$159.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
Salsa Guide Trail 35.0 Stem
$40.00 - $45.00
The Guide Trail Stem translates your handlebar input into precise trail movements. It’s an ideal choice for modern trail bikes that have a long front center and wide bars. The Guide Trail Stem is lightweight, durable, and available in a variety of sizes to suit rider preferences. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 35.0mm bar clamp - 28.6mm stem clamp - 40mm stack height - Bead-blasted, then anodized, finish
Bontrager Pro Blendr Stem
The smarter upgrade Outfit your road bike with the Pro Blendr stem to provide confident handling and integrated accessory capability. The forged alloy construction means you'll get the stiffness you demand but in a weight that'll make others jealous. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - Blendr technology seamlessly integrates accessories with included Blendr Pro base and Blendr XXX accessory mounts - Blendr XXX mounts include Bontrager Ion and Trip, Garmin, GoPro and SRM accessories - Countersunk, corrosion-resistant steel bolts do not require washers - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem
Easton EA50 Stem
$39.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
Salsa Guide Stem
$40.00 - $45.00
Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40
Promax S-29 Stem
$69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Syntace Flatforce Stem
$119.00 - $139.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Promax DA-1 Stem
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Velo Orange Tall-Stack Stem
$40.00
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
Ritchey WCS C220 Stem
$89.95
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
Ritchey WCS Carbon Matrix C220 84D Stem
$159.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
WeThePeople Hydra Stem
$60.99
Named after the multi-headed serpent from Greek mythology, the WeThePeople Hydra stem really is a beast of many heads. It's available in two rise and two clamping options, and utilizes shark tooth clamping inside the stem body to provide a vise-like grip. The hydra is one stem that won't let your bars slip any time soon. The hydra is one of the first stems on the market to be available in the 25.4mm oversize clamp option. Pair it up with any of our 25.4mm handlebars to have a truly indestructible front-end setup.
Whisky Parts Co. No. 7 Mountain Stem
$40.00 - $45.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
Ritchey WCS C220 84D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Ritchey WCS Carbon Solostreem Handlebar/Stem
$499.95
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
ENVE Road Stem
$265.00
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
Spank Spank Split 35 Stem
$89.90
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
Ritchey Comp 4 Axis Stem
$39.95
- 3D net forged 6061 alloy construction - Angled steer tube clamp slot reduces stress on carbon steer tubes - Stainless steel bar and steerer clamp bolts - Material: 3D net forged 6061 - Angle: +/- 6 degree - Steerer Height: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Bead-blast Black finish - 160g (110mm)
Ritchey Classic C-220 Stem
$69.95
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
Page 1 of 4 Next page