Accessories/Parts

- Beacon Light License plate relocation bracket - Includes bracket, M5 x 10mm (2), M5 x 16mm (2) Torx screws, mini Torx screwdriver

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Piston Fender Strap Kit

Thru-axle adapter for the Kuat TRIO rack.

Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

- Installs easily in a truck bed or anywhere else you need a simple fork mount carrier

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

- Beacon Light direct mount kit for Thule Easyfold car rack - Includes Thule direct-fit bracket, M5 x 25mm (2) and matching nuts (2), M5 x 10mm (2), Torx screwdriver

Hitch Lock V4 - Includes hitch pin, lock, and 2 keys - For locking hitch rack to car

Hitch Lock V4 - 2"

- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish

Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.

So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes

Modifies women's bike frames as well as BMX and non-standard frames to be carried on a hanging-style hitch and strap mount bike racks. Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX, and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely. Features: - Telescopic adjustment (18" - 30.5”) fits most bike frames - New push button clamps for quick installation and removal - Molded rubber pads protect the bike finish - Thule Frame Adapter 982XT - Keeps bike securely centered and mounted on hanging-style rear mounts - Durable rubber collars secure easily and safely to bike stem and seat post

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

- High security key allows for easy access with only a half-turn to unlock - Premium chrome plated for maximum rust protection - 8.5 ft. long 10mm security cable with hitch pin adapter

The PISTON PRO LICENSE PLATE MOUNT seamlessly integrates into the endcap of The PISTON PRO hitch bike rack. Installation is simple. Remove the endcap, place the LICENSE PLATE MOUNT on the exposed center beam, and reassemble your PISTON PRO endcap. An easy upgrade for enhanced license plate visibility.

For 2" hitches, this extension gives you more clearance for your bike rack or trailer away from the vehicle. The insert tube is threaded, by bolting in the extension, you get rid of 80% of the play and rattle vs extensions that use a pin. Included is the 8" extension, hitch bolt, and lock pod. Allows BackStage, MonoRail & SplitRail racks to fold flat on Wrangler and other cars with spare tires. Works well with all bike racks including Thule, Yakima, and Kuat. As with all hitch extensions, they lower weight ratings by 50%, confirm you are within specifications before use. - Electroplated plus powdercoat for best rust resistance - Welded steel construction - Includes lock, two keys & wrench for installation - Fits 2" Hitches only - Maximum Trailer Weight- Lower amount of 3500 lbs OR 50% maximum listed on your trailer hitch - Maximum Tongue Weight- Lower amount of 350 lbs or 50% of maximum listed on your hitch. (For use with bicycles, Tongue Weight is your guide, not Trailer Weight)

The NV Family LICENSE PLATE MOUNT seamlessly integrates into the endcap of the NV 2.0 and NV Base 2.0 hitch bike racks. Installation for the NV 2.0 hitch racks includes the removal of the Trail Doc in the endcap, then the replacement of the LICENSE PLATE MOUNT in the exposed center beam. Installation for the NV Base 2.0 includes a simple endcap removal before adding the LICENSE PLATE MOUNT. Either way, a quick and easy upgrade for enhanced license plate visibility.

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Piston E-Bike Ramp

Trail Doc accessory kit for the NV Base 2.0 rack from Kuat Racks.

Accessories for the Kuat Piston Ion E-Bike Rack.

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

Designed with the eBike enthusiast in mind, the MHS Ramp makes heavy lifting and awkward bike loading a thing of the past. Simply connect the American-made ramp to any MHS DUO tray and roll your ride into position with minimal effort. Once bicycles are loaded, collapse and stow the ramp for storage – and save your energy for the adventure ahead. - Bike ramp for MHS Duo tray style hitch rack configurations. - Easily roll bikes (up to 100 lb.) onto any MHS Duo tray, eliminating heavy lifting. - Stow and go with the MHS Ramp’s folding design. - Ideal for heavy bicycles, including eBikes. - Built with durable American-made steel.

When it’s time to upgrade that old blanket, get the HUK tailgate pad from Kuat. The HUK tailgate pad is constructed from durable TPU and designed to withstand harsh UV rays and the rigors of the road. This tailgate bike pad ensures both your truck and your bikes are protected from the elements, while the soft-touch backing and extra padding ensure your truck’s paint stays pristine. Each tailgate pad size comes with a 3-year limited warranty. The HUK tailgate bike pad is built to accommodate a wide range of truck sizes. Available in full-size, full-sized curved, and half-pad options that accommodate from two to six bikes. And most variations feature our handy roll-up window which provides an unobstructed view through your backup camera and makes raising and lowering the tailgate hassle-free. - Welded seam construction with soft-touch backing - Extra 1" padding on truck pad top for extra cushion where you need it most - Metal G-Hook buckles for a fast and secure hold - The roll-up window provides an unobstructed view through your backup camera and makes raising and lowering your tailgate hassle-free - 25-inch