Fenders

FUNCTIONAL. FASHIONABLE. FENDERS. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. PRODUCT DETAILS - Original replacement fenders for Electra Townie bikes - Color matched for direct compatibility

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Details: - Fenders intended for warranty and service use. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility - Sold in pairs - Includes struts

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Details; - Fenders intended for warranty and service use. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility - Sold in pairs - Includes struts

Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.

The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included

Turn your bike into an all-weather vehicle with Planet Bike's Cascadia ALX Fenders. Made of unbreakable corrosion-resistant 6061 aluminum with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection plus release tabs on the front fender for easy on/off. The hardware's even pre-installed for quick mounting.

- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.

The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible

The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.

- Contains 2 Mudflaps and Quick-Snap Attachments - Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately) - For use with 45mm width fenders (sold separately)

Fender set with flexible spoiler It doesn't get any longer than this: The BLUEMELS STYLE mudguard set with a flexible spoiler offers excellent all-around protection against splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the mudguard is extremely robust, rigid, and protected against corrosion. New V adapter with ESC security system With its matt black surface and the black fastening components, the BLUEMELS STYLE also leaves nothing to be desired in terms of looks. The newly developed V-adapter with ESC safety system decouples the double U-struts when branches get between the spokes so that the wheel does not lock. Incl. accessories and struts. - Aluminum/plastic sandwich construction - With a flexible spoiler - V-adapter with ESC safety system - Stable double U-struts - Made in Germany

Fender set with flexible spoiler It doesn't get any longer than this: The BLUEMELS STYLE mudguard set with a flexible spoiler offers excellent all-round protection against splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the mudguard is extremely robust, rigid and protected against corrosion. New V adapter with ESC security system With its matt black surface and the black fastening components, the BLUEMELS STYLE also leaves nothing to be desired in terms of looks. The newly developed V-adapter with ESC safety system decouples the double U-struts when branches get between the spokes so that the wheel does not lock. Incl. accessories and struts. - Aluminum/plastic sandwich construction - With a flexible spoiler - V-adapter with ESC safety system - Stable double U-struts - Made in Germany

The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.

Mudrocker Rear Fender for MTB protects you AND your suspension and linkage from water and mud. Provides excellent coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" The fender attaches to the seat stays with hook and loop straps (or cable ties if perferred). With the included frame adapter pads, user can adjust the angle of the fender. The included rear extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. Perfect companion with the Mudrocker Front Fender. (If you lose your Adapter Pads or your Extender, they are both sold separately as well.) - Measurements: 840mm - Weight: 172 grams - Made in Germany

S-BOARD This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included. S-BLADE The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted. - Weight: 206g - Wheel size: 650B – 28-inch - Tire width: 30 – 38mm - Length front fender: 390mm - Length rear fender: 465mm

Ride in any weather The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount. Product details - Fully assembled fenders that install in minutes - Integrated rear Blendr light mount for use with Bontrager Flare lights - No-cut struts allow quick strut adjustment for proper tire clearance - Double-back strut on rear fender adds support and stability - Made of lightweight yet super-durable polycarbonate - Stainless steel hardware resists rust - Four sizes available to accommodate most bike and tire configurations

The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler

Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes. The XL is ideal for 29ers thanks to 60mm of extra length.

The Grunge front fender was made for your messiest dirt adventures. It's super durable and provides exceptional coverage from mud, crud and spray. Its 3.4-inch wide profile and innovative steer tube mounting system will work on most suspension and rigid forks. - Durable all-weather polypropylene blade - Mounts to most suspension and rigid forks - Includes hardware to fit small, standard and oversized tapered steerer tubes (18.5-34.5mm ID) - Eyelets Required?: No - Wheel size: 26", 650b, 29" and 700c - Dimensions: 85mm wide x 600mm long - Max tire width: 2.1" - Weight: 160 grams

Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.

The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany

IMPACT-RESISTANT CLEANERS FOR THE BIKE Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ESC safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ESC safety system - Bottom bracket cutouts - Made in Germany - Wheel size: 20" - Tire width in inches: 1.2"-1.8" - Tire width in mm: 30-54mm - Front mudguard length: 500mm - Rear mudguard length: 800mm

Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

Turn your big-wheeled bike into an all-weather vehicle with the Cascadia 29er Fenders. Made of unbreakable polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

This ultra long clip-on mudguard set for road bike tires (up to max. 25mm width) protects you, whether you’re riding your road bike in a warm summer rain or on solitary winter trips. The end of each mudguard extends to below the hub axles. This length ensures a full coverage, meaning you, and also the cyclist behind you, are spared from splashing. They can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Once the metal mounting brackets are fitted to the bicycle, the mudguards can be clipped on and off in seconds making them ideal for use as needed. Brackets attach at brake bolts and skewers. - End of each fender extends to below the hub axles - Length ensures full coverage for the user and those riding in proximity - Can be adapted to the radius of the wheel by adjusting the length of the stays

These clip-on fenders are designed specifically for fat bikes. They're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle - Works with both rigid and suspension forks

Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

- Rubber straps - Fit Raceblade, Mud-x - Set of 8

Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus the hardware is pre-installed for quick mounting.