Filter By:
Riser

$78.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem.
Material: CroMoly steel
Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp
Width: 820mm; Can be cut to 720mm
Rise: 83mm
Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep
Weight: 778g including shims
Color: Black

$188.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain.
- Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight
- 15mm rise helps you dial in the perfect hand position
- Brake and shifter lever position lines for spot-on control setup
- 40mm of cut marks on each side for easy width customization
- OCLV Carbon construction is the benchmark for durability and light weight

$114.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Increased strength and stiffness compared to conventional alloy bars
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
Features
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy
- Material: MGR Super 6 Alloy
- Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm)
- Sweep: 4° up x 8° back
- Finish: Shot peen anodized, decal logos

$179.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it.
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- 35mm bar diameter for incredible strength/weight ratio

$165.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package.
- Unidirectional carbon fiber construction
- 35mm stem clamp
- 8 degrees of backsweep with 5 degrees of upsweep
- Trimmable ends, made easy with graphic markings
- Rated to ASTM Condition 4 for extreme off-road riding

$84.99
- All new DJ/ Slopestyle premier handlebar designed for progression
- 760mm wide
- Featuring our Exclusive Gradient Butting technology
- 31.8mm center bore
- Full bead blast finish for increased durability and fatigue resistance
- 9 degree bend / backsweep and 5 degree upsweep for ultimate comfort
- Available in black ano finish with color graphic options
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 50mm: 323g
- 80mm: 334g

$129.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- OCLV Carbon construction is the benchmark for durability and light weight
- Shifter and brake lever position lines for spot-on control setup
- 4 degree upsweep and 9 degree backsweep optimal for XC and trail
- 40mm of cut marks on each side allow for easy width customization

$33.95
With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build.
- Material: 6061 alloy
- Width: 670mm
- Rise: 30mm
- Backsweep: 9°
- Upsweep: 2°
- Clamp diameter: 25.4mm
- Bar-end compatible: yes
- Weight: 399g

$79.99
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight.
Large and in charge
Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup.
Product details
- Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter
- Quad-butted, tapered wall, 7050-T6 aluminum construction
- Laser-etched brake lever position lines for spot-on control setup

$179.99
- Intended use: XC and Trail
- Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform
- Manufactured from UD Carbon with matte clearcoat
- Requires 35mm bar clamp diameter stem
- 8 degree rearward sweep, 5 degree upward sweep

$49.99
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar.
- Shot-peened to increase fatigue resistance
- 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance
- Manufactured from cold drawn, seamless aluminum
- Upsweep: 5°
- Backsweep: 8°

$179.99
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world.
SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance.
- SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight
- Minimum bar width of 28" or 710mm at indicated cut marks
- Reinforced clamping zones for lock-on grip
- Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers

$89.99
DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain!
Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat!
- The DEITY All MTN / Enduro / Trail handlebar
- 787mm wide
- The SKYLINE handlebar is our lightest aluminum bar
- Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability
- Custom Gradient Butted 7075 T73 aluminum
- Featuring a 31.8mm bore for lightweight performance and strength
- Features measured cut marks and center alignment detail
- 9 degree bend / backsweep by 5 degree upsweep
- Black ano finish with color graphics
- Covered by our Lifetime Crash Replacement Policy to the original owner
Sizes:
- 15mm (290gm)
- 25mm (296gm)

$179.99
After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar.
Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides.
- Oversized 35mm Bore Carbon Handlebar
- Designed for Enduro / All Mountain / Trail
- Developed and designed exclusively with our own in house DEITY molds
- Unidirectional Carbon Construction
- Damping properties reduce hand fatigue
- 800mm Width
- 9 degree bend x 5 degree upsweep
- The ultimate combination of strength, weight, and ride quality
- Textured non slip stem clamping surface
- Textured grip ends for added bite
- Covered by our Lifetime Crash Replacement Policy to the original owner
- Recommended MAX Torque Spec range (4 - 4.5 Nm)
- 15mm rise: 222 grams
- 25mm rise: 226 grams

$89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you.
- Manufactured from cold drawn, 7075 Aluminium
- 35 optimized triple butted design
- Turned up to Rally control with 800mm width
- Rise sizes to for every build and preference 10/20/35mm
- Stealth black on black decals to match every frame color

$89.99
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships!
- 800mm width
- Designed for DH / Enduro / All MTN applications
- Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018
- Incredibly detailed two-tone bead blast and polished ano finish
- 9-degree bend / backsweep by 5-degree upsweep
- Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
- Designed for maximum ride quality with a 31.8mm bore
- World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven
- The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams
- Features measured cut marks and center alignment detail
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 15mm rise: 333g
- 25mm rise: 342g
- 38mm rise: 343g

$33.00
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

$203.45
- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar.
- Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

$203.45
An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings.
- Uni-Directional carbon construction
- Ride-tuned to provide an ideal combination of stiffness and shock absorption
- Increased center section width for fine-tuned flex characteristics
- Downhill and twin crown fork compatible
- Permanent graphics, set-up grid and cut marks

$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface.
- Upsweep: 5°
- Backsweep: 9° (760mm bars)
- Backsweep: 7° (all other bars)

$99.00
- The original Chromag bar
- Used from XC to DH, the OSX is Chromag's most versatile option
- 31.8mm clamp
Specs:
- Rise: 25mm
- Handlebar Width: 800mm
- Stem Clamp Diameter: 31.8mm
- Handlebar Material: Aluminum
- Upsweep: 5 degrees
- Backsweep: 8 degrees

$210.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds.
- Compatible with road, mountain, and bar-end controls
- Tested to ASTM 3
- 90mm clamping area to fit Salsa Anything Cradle
- Can be ridden in up or down position
- Unidirectional carbon fiber construction
- Weight: 250g

$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm

$34.95
The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist.
- Gentle sweep for ergonomic performance
- Bar Clamp Diameter: 31.8mm
- Width: 740mm
- Back Sweep: 9 degrees
- Weight: 380g
- Material: Alloy

$34.95
Just enough rise, and at the right width, Ritchey Trail Rizer is a heavy-duty performer at entry-level pricing.
- Material: double-butted 6061 alloy
- Width: 780mm
- Rise: 20mm
- Backsweep: 9°
- Upsweep: 2°
- Clamp diameter: 31.8mm
- Bar-end compatible: yes
- Weight: 385g

$89.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more.
- Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy
- Material: MGR Super Six Alloy
- Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm)
- Diameter: 31.8mm
- Rise: 5mm / 15mm / 30mm / 50mm
- Length: 800mm (Adjustable to 740mm)
- Geometry: 4° up x 8° back
- Finish: Shotpeen anodized, decal logos

$114.99
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider.
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR
- Material: Zirconium Doped 7-Series Alloy
- Weight (g): ±270g (15) / ±275g (25)
- Diameter (mm): 31,8
- Rise (mm): 15 / 25
- Length (mm): 780
- Geometry (deg°): 5° up x 7° back
- Finish: Shot peen anodized, decal logos

$170.00
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep.
- Material: Carbon
- Weight: 245g (30mm rise); 265g (50mm rise)
- Bar Width (Max): 810mm
- Bar Width (Min): 780mm
- Clamp Diameter: 31.8mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
Page 1 of 3
Next page