Parts & Accessories
DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset. Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty. Features & Benefits: - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current. - Available in 130 BCD and 110 BCD. - Replaces the standard spider. - A Specialized lockring tool is required for installation.
- Stainless steel chiainring/spider lockring for all e*thirteen cranks that use the Quick Connect Direct Mount System - Requires e*thirteen spider lockring tool. Use QBP part # TL0212
$4.50 - $6.25
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.
The North Shore Billet 1×11 Spider replaces the removable chain ring spider so that you can run a SRAM XX1 chain ring on Truvativ X0, X01, X1, X9, GX, S2210, and S1400 cranks. There are no mounting holes for the granny ring and the single ring’s position is designed to give a better chain line throughout the entire gear range. The chain ring tabs accept an optional rock ring for All Mountain or Enduro riding.
- Crank Construction : HOLLOWTECH II - Optimum power transfer
$90.00 - $117.00
Shimano Chainring Bolts - For use with M9000 chainrings
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
- Service parts for E-13 chainguides
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
Shimano XT Left Crank Arm - Spindle Interface Type: Hollowtech II
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - BB mounted guides are only compatible with traditional, threaded BB systems
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
For Race Face 30mm Cinch System cranks only. Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle. - 30 x 136.5mm is for 120mm spaced BMX hubs and 68/73mm BBs - 30 x 151.5mm is for 150/157mm Hubs
Easton spider and ring assemblies for CINCH cranks.
Spindle and hardware kit for Race Face CINCH MTB and fatbike cranks.
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
- Series: SLX - Crank Construction: HOLLOWTECH II Technology
$39.99 - $44.99
Aluminum bash guard.
Replacement crank spindle for Easton EC90 SL cranks
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Shimano XTR Left Crank Arms - Spindle Interface Type: Hollowtech II
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
Designed to work seamlessly with the new wave of 2×10 drivetrains, the 2x utilizes MRP's patented integrated skid chainring protection (US Patents RE 42,436 / 8,235,849 Patents Pending) and features a dual pulley tensioning system. Notable on the 2x system is the absence of a crank-mounted bash guard or guide ring, instead it relies on the front derailleur and cutting-edge lower pulley assembly for complete chain retention. The integrated skid protects the chainrings from impacts without the added weight of a full bash ring. The dual pulley tensioning system ensures that the chain is properly tensioned and in the right position, keeping it on the chainring in the roughest conditions. The dual pulleys also reduce drag and noise compared to other designs, ensuring a better riding experience. Finally, the raised top fin profile prevents the chain from dropping to the BB shell. - Removable integrated skid protects chainrings and glides over rocks and obstacles - Dual pulley design provides precise chain engagement while reducing noise and drag - Raised top fin profile prevents the chain from dropping to the BB shell - BB mounted guides are only compatible with traditional, threaded BB systems
With the SXg, MRP delivers a guide without compromise and with no equal. No longer does the desire for protection and both upper and lower retention have to come at the expense of weight, efficiency, or the addition of moving parts - have your cake and eat it too. With the SXg covering all those bases, it’s the first guide in history that’s equally at home on anything from aggressive, short-travel bikes to Armageddon-ready Rampage rigs, and everywhere in-between. It’s a guide that refuses to be pigeon-holed, blurring the lines between typical industry definitions - a little country and a little rock, as they say. But, in this case, it’s a whole lotta rock. High-security chain retention and bulletproof chainring defense in an innovative, lightweight package with zero efficiency loss make the SXg ideal for a wide range of uses. Whippersnapper™ technology provides lower retention without moving parts or friction. The most advanced chainguide on the market, the SXg is the go-to of the top Rampage stuntmen, World Cup downhill pilots, and superhuman enduro tacticians. - Whippersnapper™ lower guide. - Full-size, nylon HD upper guide with co-molding. - Integrated SX skid provides safeguard to the chainring and glides over rocks and obstacles. - Nylon and TPU co-molding in the Whippersnapper™ provides durable protection from external blows and mutes internal contact with the chain. - Swingset™ hardware. - All installation and adjustment operations are possible with just a single 4mm HEX wrench. - Available in 30-34t and 34-38t sizing. - Alloy guides compatible with chainlines 49mm and wider, carbon 50mm and wider. Boost 148 compatible. - ISCG-05 only. - 149g (34-38t Alloy ISCG-05)
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Page 1 of 3 Next page