Drivetrain Components

Bottom brackets from FSA for non-threaded applications. - 24mm spindle compatibility - Stainless steel bearings - Spindle Interface Type: FSA MegaExo - BB Shell Width: 92mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB92

- 42-32-22T - Alloy Outer Chainring - Alloy Forged Cranks - Square Taper

No mixed messaging or compromises here. The GX DH cassette was built with only one purpose in mind—exploiting gravity to its fullest lap after lap. This downhill-optimized 7-speed cassette provides gear steps that give each shift more purpose, and its compact design allows more spoke clearance. It’s a full-on, dedicated SRAM 1x cassette for gravity that lets you keep some money for a lift ticket. GX DH—Get Some. - The PG-720 cassette is an integral part of the SRAM 1x DH drivetrain system - This is the most affordable full-featured, dedicated 1x DH cassette in the industry - Fewer cogs allow for a faster transition from starting cog to highest cog - More rear wheel clearance around spokes - Fully compatible with the SRAM X01 DH drivetrain - Splined driver body compatible - Weight: 224 grams - Gear-Ratio:11 – 25T - Speeds: 7 - Recommended Group: GX DH

Shimano SLX M665 middle chainring for 9-Speed drivetrains. - For use with 22t inner chainring and bashguard - Ring Position/Type: Middle - Chainring BCD: 104

When it comes to adventurous riding, a wider gear range is often better. With 9 speed and a 11-42T range, the ADVENT cassette has the low gears to get up and the high gears to get back down. The steps between gears are optimized to give an even spread in gear ratios, reducing the need for double-shifting to find the right gear. - Carbon steel cogs are continuously forged for strength and shifting accuracy - Compatible with standard freehub bodies - ED black surface finish - Combination: 11-13-15-18-21-24-28-34-42

Race Face bottom bracket spacer kit for 124-130mm bottom brackets.

The high torque loads of E-MTBs require tough components. The straighter chain line EX1 offers allows the use of a chain that is wider and more robust than those found on drivetrains not specifically engineered for E-MTBs. The EX1 chain has been engineered to run quiet across the gear range and transmit more power to the rear wheel. - EX1 chain is wider and designed for the high-torque, heavy-duty use of E-MTB - Compatibility: 10-speed - Chain length: 144 links

SHIMANO DEORE - 126 links for HG 12-SPEED - MTB Chain The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings. - Proprietary design ensures smooth shifting and strength - Extended inner plate improves chain engagement and retention - Shorter shift times and less pedaling shock - Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings

Exceptional front shifting performance for large-wheel mountain bikes. Tackle trails with this Shimano CUES FD-U6000 front derailleur's smooth and quiet shifting. It is compatible with 2x11 and 2x10-speed drivetrains. - Smooth and quiet shifting on and off the trail - Provides and extra-wide range with front double - Offers wider tire clearance - Works with 48.8 - 51.8mm chainlines - 64-69 degree chainstay angle

• Lightweight seal structure removes grams • Durable anodized finish • Includes left and right hand cups, spacers, inner cover, and inner o-rings • Easy installation with TL-FC25 tool • Compatible with 24mm crank spindles • English, threaded: 68/73mm bottom bracket • Pressfit: BB86/92 bottom brackets

Shimano's Sora cassette is an incredible value for your 9-speed drivetrain. Crisp shifting and a low weight keep your mind focused on having fun on your bike and not adjusting it. This cassette comes in a range of sizes to suit your riding style and terrain.

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

The KMC HL1L Wide chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear. - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Stretch-proof treatments provides exceptional durability - Hollow pin construction reduces chain weight - Links (links): 100 - Color: Black - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Bullet Pin - Half Link Chain: Yes

The KMC K1SL SuperLite Kool Chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear, while offering substantial weight savings. - SL Chain sets a new standard with weight reduction, improved shifting performance & enhanced durability - The mud-shedding design is easy to clean - Chain features a heavy duty structure and is treated with a stretch proof treatment for maximum durability - Designed with KMC's Special Dynamic K Configuration which offers unsurpassable chain strength - Inner plate chamfering provides expeditious shifting - Features an anti-drop design - Links (links): 100 - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Single Use Master Link - Weight: 349 g

Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level KMC X-Series chains. - Includes KMC Missing Link 11 - Optimized chamfer angles for superior stability in extreme chainlines - Upgraded outer plate chamfering for minimized cassette tooth interference - Double X-Bridge structure technology for improved shifting performance - Mushroomed Pin Riveted - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems

Surly's MWOD Inner Chainrings are made from stainless steel for extreme durability. These rings are compatible with Surly's MWOD cranks.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.

Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

Shimano's Claris rear derailleur is a perfect replacement part or upgrade for 8-speed road drivetrains. HyperGlide technology results in smoother, faster shifting. - Maximum cog size: 32t (SS) / 34t (GS) - Total capacity: 37t (SS) / 43t (GS) - Pulleys: 11t - Chain compatibility: HG 8-speed

The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The heart of this microSHIFT Acolyte derailleur is the innovative SpringLock system. By pairing a customized linear rate high tension spring and a dual stage activation mechanism, we’ve developed a system that can provide substantial chain security when you need it and can be turned off when you don’t.  To engage the clutch, turn the engagement bolt clockwise until it clicks. There’s no way to overtighten the bolt. To disengage the clutch for wheel removal, flip the switch. It’s that simple. - Innovative SpringLock chain retention keeps chain in place over rough terrain - Direct path cable routing for smooth and responsive shifting - Compatible with 12-42T and 12-46T 8-speed cassettes - Compatible with Acolyte shifters only

- Model Number: FD-R3000 - Series: SORA - Top Gear Teeth: 46-52T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes

The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

Campagnolo ProTech bottom brackets feature a patented external sealing ring design that protects a strong, resilient fiberglass-charged polyamide central tube from the harmful ingress of water, mud and grit. - Designed specifically for gravel riding and racing to protect against water, mud & grit

6061 CNC machined Alloy cups w/ Precision sealed bearings. - Bearings: 19mm mid sealed (x2) (with american cups) - Spindle: 19mm, 8 spline (included in kit) - Spacers: 6061 Alloy cones with 15/16"/19mm hat washer and 4x spacers included NOTE: These sealed American BB & American BB sealed upgrade kit (with 8-spline spindle) are designed to replace the 8 spline spindle and bearings of an unsealed American BB with a sealed version. Fits most complete bikes that come with unsealed American 19mm BB. 19mm Model does not come with a spindle.