Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals
These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also sometimes with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals.
Shimano's M520s are affordable clipless pedals that are easy to enter and exit and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension and these sweet pedals have an open mud-shedding design to prevent clogging. They feature chromoly axles and sealed bearings for durability, too.
Weight: 260g
Body: Magnesium
Spindle: CroMo
Bearings: 2 Cartridge
Bushings: 1 DU
Pins: 28 Straight Pins per pair
Size: 106x100x11 (mm)
Colors: Gold, Black, Red, White, Silver
Weighing in at a mere 260grams per set, the SPRY with its sleek super low-profile design makes a great addition to the XPEDO flat pedal line up. The magnesium cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. The SPRY is available in five colors: Black, White, Red, Gold or Silver.
$9.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)
$9.99
Simple functionality: that's what Electra's Deluxe Block Pedals offer your favorite cruiser. With plenty of platform for your sneakers, the Deluxe Block Pedals are as comfortable as can be for your entire ride.
$9.99
- High impact Resin multi-use body with integrated cage
- Externally sealed ball bearing system
- 100mm x 82mm platform
- Weight: 316g pair (9/16")
$15.99
$29.99
47% Off
Confident and durable
The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with sealed cartridge bearings ensure lasting performance.
Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip.
- Durable nylon body with a proven shape for comfort and confidence
- Sturdy axle boosts durability and spins smoothly on sealed cartridge bearings
- Nylon traction pins provide forgiving, confident traction
- Simple to install with either 6mm hex or standard 15mm pedal wrench
$16.00
Dimension City Pedals.
- Built-in reflectors, will not accept toe clips
- Molded nylon; 1-piece, caged-type pedal
- Slip-resistant surface
$16.00
Dimension Mountain Basic Pedals.
- Molded nylon 1-piece, caged-type pedal with reflectors
- Accepts toe clips
- Hang tag packaging
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 330g
$16.99
Eclat Centric Pedals
- Pedal Type: Platform
- Pedal Spindle: 9/16"
- Color: Real Black
- Defined Color: Black
- Spindle Material: Chromoly
- Pedal Body Material: Composite/Plastic
$17.99
Salt Junior pedals with a new shape for smaller feet. Knurled surface and extra pins for improved traction.
- 9/16"
$19.99
Dimension Cruiser/Comfort Pedals.
- Forged aluminum platform-type body with slip-resistant surface and built-in reflectors
- Platform size is 105.5 x 74mm
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 448g
$19.99
Dimension Mountain Sport Pedals.
- Molded nylon pedal body
- Accepts toe clips
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly
- Weight: 290g
$19.99
- Stability and comfort for city bikes and cruisers
- Non-slip TPE tread has a distinctive grip texture that provides safe traction
- Large platform is supportive and has a dual-concave shape
- Lightweight plastic body with Boron steel spindle
- Reflector Included
- Comfortable for most shoe types
$19.99
One of the most successful and popular pedals, and for good reason.
The original Twisted PC is extremely simple, lightweight, inexpensive, and famously durable plastic-bodied design. Often duplicated but never replicated.
Features:
- High-strength nylon composite
- 16 pins per side
- Traditional looseball bearings
- Chromoly spindle
Specs:
- Width: 98mm
- Length: 89mm
$19.99
WTP's large platform design team series pedals.
- 9/16"
- Spindle Material: Chromoly
- Pedal Body Material: Composite/Plastic
$20.99
The Plaza features an unusually large platform with a concave profile, hexagonal pins and extra-fine knurling.
- Injection-molded nylon / fibreglass
- Knurled top surface
- Chromoly spindle
- Overall wider pedal body
- Loose ball
- 9/16"
$20.99
- Lightweight alloy body with steel cage
- Toe-clip compatible
- 9/16-inch Cr-Mo axle
$21.99
The Slash PC is a low-profile, loose-ball pedal with a chromoly spindle and a classic shape.
- Injection-molded nylon / fibreglass
- Knurled top surface
- Chromoly spindle
- Loose ball
- 9/16"
$21.99
The Twisted Pro pedal features a larger body shape, slimmer height and more concave.
- Loose-ball bearing
$24.99
- Economical resin pedals w/toe clips and straps
- 9/16-inch Cr-Mo axles
$24.99
- Forged alloy body with non-slip steel cage
- Heat treated Boron 9/16" axle spindle
- Sealed cartridge bearing system
- Weight: 240g pair (9/16")
$24.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform.
- 17mm thick at center
- 105mm wide
- Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach
$25.99
- High-strenght Nylon body with injected fiber
- 9/16" Cr-Mo axle
- Ball bearings
$26.00
Dimension Mountain Compe Pedals.
- Forged aluminum body
- Accepts toe clips
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 335g
$30.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors.
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 475g
$30.00
$74.00
59% Off
- Versatile and incredibly affordable.
- The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time.
- The ATAC EASY cleat makes for simple setup and clipping in and out even easier.
- Pedal Material: Composite
- Pedal Weight: 197g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$30.00
$69.00
57% Off
- All of the technologies from the rest of XPRESSO line at an affordable price.
- The large platform, low stack height, and adjustable carbon blade tension make this a great pedal for all cyclists looking for pedaling comfort and efficiency without a high cost.
- If you're new to clipless pedals or have ever struggled to clip into your pedals, you'll love the ICLIC system, which features a pre-opened design that makes clipping in extremely easy.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$31.95
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives
- 15mm height/100mm width
- CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance
- Design compatible with most foot-retention strap systems including Gates Straps (available separately)
- Weight: 345g
$32.99
The Throttle pedals feature a large, low profile platform with a knurled concave shape.
- 6063 aluminum body with 8 removable pins per side
- Recessed end to prevent damage to bearing cover
- Chromoly spindle with 6mm broach and 15mm wrench flats
- Pedal Type: Platform
- Pedal Spindle: 9/16-inch
$33.99
The Slash is a low-profile, loose-ball pedal with a chromoly spindle, replaceable pins, and a classic shape.
- Cast alloy body, crmo spindle
- Replaceable pins
- Loose ball
- 9/16"
$34.99
- Alloy body with steel cage
- 9/16-inch Cr-Mo axle
- Toe clips and straps
$34.99
Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip.
Confident and durable
The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with dual bushings ensure lasting performance.
PRODUCT DETAILS
- Durable nylon body with a proven shape for comfort and confidence
- Sturdy axle boosts durability and spins smoothly on dual bushings
- Nylon traction pins provide forgiving, confident traction
- Simple to install with either 6mm hex or standard 15mm pedal wrench
$35.00
$84.00
58% Off
- Large platform and an easy-entry system, make it perfect for everyday use.
- Cleat engagement is easy and positive in every condition and for every skill level.
- Hollow steel axle makes the pedal lightweight yet durable, while the open design keeps you riding with ease, clearing mud and debris every time you clip in.
- Pedal Material: Composite
- Pedal Weight: 192g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$36.99
Thinner profile pedal body, completely flat, without any kind of bump or raised section. Combined with a larger overall surface area, a dual concave design, and a micro-knurled surface. A larger pedal gives the foot more support, especially on tricks where your feet come off and also on hard landings, since the load is more spread out and evenly distributed. The Seeker pedal uses twin sealed bearings and a bushing for extra support.
- Strong spindle design
- Thinner profile, larger platform
- Replaceable pedal body
- 9/16"
$37.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors.
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 520g
$38.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform.
- 17mm thick at center
- 105mm wide
- Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach
$39.00 - $39.99
$39.00 - $49.99
Up to 20% Off
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g
$39.95
Wellgo WPD-823 Clipless Mountain Pedals.
- Includes 98A cleats, Shimano SM-51 compatible
- Dual-spring release/entry tension adjustment
- Four degrees of Rotation
- 9/16"
$39.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance.
- Molded traction pins give you all the grip you need without risk of damaging your shoes or shins
- Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts
- 9/16"
$40.00
$90.00
56% Off
- Built for everyday use and features a stainless steel top plate and a hollow, steel axle.
- A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal.
- The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$42.75
MSW Thump composite pedals feature a concave shape and tall pins to provide a "just-right" amount of traction--enough for the rigors of riding off-road--but with in-mold nylon pins to keep calves laceration-free on more casual rides. Balance doesn’t have to mean boring!
- Tough nylon composite body with in-mold pins
- Chromoly steel, 9/16” spindles, sealed cartridge bearings and nylon bushings
- Platform size = 118 x 99 x 19 mm
- Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort
- Black
- Made in Taiwan
$45.00
$106.00
58% Off
- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents.
- TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast.
- The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 238g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$45.99
- Rugged nylon construction for the toughest trails
- Large 106x100mm platform provides superior stability
- Concave platform and grip pins offer tenacious grip
- 8 replaceable threaded steel traction pins per side
- Sealed Cro-Mo steel axle with 9/16" spindle
$47.50
$95.00
50% Off
- Oversized, hollow, steel axle, is lightweight yet rugged enough for any trail condition.
- TIME's clamping system makes clipping in super easy.
- Two release angle options (13° or 17°) along with a self-cleaning design that means you'll always be able to clip in – even in the muddiest of conditions.
- Pedal Material: Composite
- Pedal Weight: 190g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$49.00 - $69.00
Light, impact resistant. New for 2018 is the Synth Pedal. An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank. Modeled after our Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system. It uses the same high-end axle and bearing assembly as on our Scarab and Contact models so you can count on long-life and smooth performance, with common serviceability components available from Chromag.
$49.99
Dimension Mountain Pro Pedals.
- Forged aluminum body
- Sealed bearings
- Accepts toe clips
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 270 g
$50.00
PA12A pedals feature a reinforced nylon composite body with replaceable grip pins and CNC machined chromoly spindle.
- 2 x sealed bearings and DU bushings
- Replaceable grip pins
- Dimensions: 100 x 95 x 18 mm
$50.00
The TRAIL FUSION pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colors and forget your limits out on the trail!
$50.00
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability.
- 380 grams (pair)
$51.99
- 90mm x 90mm Small Platform
- Cro-Mo Axle
- 6 rear loading, replaceable steel pins
- Gripper profile for enhanced pedal traction
- Fully sealed and lightweight DU bushing design
- Pedal Weight: 310g
$51.99
- 90mm x 90mm Small Platform
- Cro-Mo Axle
- 6 rear loading, replaceable steel pins
- Gripper profile for enhanced pedal traction
- Fully sealed and lightweight DU bushing design
$51.99
- 90mm x 90mm Small Platform
- Cro-Mo Axle
- 6 rear loading, replaceable steel pins
- Gripper profile for enhanced pedal traction
- Fully sealed and lightweight DU bushing design
$52.25
Different rides call for different footwear, which is why MSW's CP-100 Platform and Clipless pedals accommodate any shoes you've got. On one side, you've got a stable, wide platform to accommodate street shoes, and on the other, you've got an SPD-style clipless pedal that accommodates your favorite mountain bike shoes. The spring tension on the clipless side is adjustable so you can customize how much pressure it takes to unclip. On the trail or on the pavement, the CP-100 is a versatile, stable platform.
$54.99
Platform pedals with a durable nylon design and replaceable pins for consistent grip.
- Durable nylon body with a proven shape for comfort and confidence
- Virtual concave design with pin placement secures your shoe for pedaling and descending
- Durable axle spins on sealed cartridge bearings
- Replaceable steel traction pins
- Install with 8mm hex wrench
$55.00
- Premium reinforced nylon composite body
- Dual sealed bearings and DU bushing
- 8 replaceable pins per side
- Platform dimensions: 100 x 105 x 18mm
$57.00
Get connected to your daily ride with MSW's MP-100 Dual-Sided Clipless Pedals. They feature dual-sided entry so clipping in quickly is a snap, and the adjustable spring tension lets you customize exactly how much force it takes to unclip. These no-nonsense pedals are stellar in all conditions, and when the going gets sloppy, the mud-shedding design ensures you can still get in and out of your pedals quickly and easily.
Page 1 of 3
Next page