Filter By:
Brakes/Levers/Pads
$10.99 - $20.99
- Hayes service parts for calipers
- Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
$13.99
- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper
- Sold (10) per bag
$16.99
Hose fittings for Hayes hydraulic disc brakes available a la carte.
Hayes brake compatibility:
- HFX-9
- Prime
- Sole
- El Camino
- Radar
$17.85 - $21.00
- T100 Sintered Metallic: long-life, all-condition compound
- T106 Semi Metallic: no-bed, shorter-life, quieter compound
- Set includes one pair of pads with retention clip
$17.99 - $19.99
For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available)
- (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle
- Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters
$25.99
- MC bodies are bare (no guts, reservoir, lever, etc.)
- Stroker Series bodies come with bar clamp and bolts
$49.99
- Prime 2-piece rotors are for Prime Pro and Expert brakes only
- L-series, lightweight one piece rotors
- V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean
- Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound
- 205g @ 203mm
$59.99
The D-Series rotor was developed in conjunction with the new Dominion disc brake, designed to provide consistent and reliable stopping power under all conditions.
- Proprietary friction surface, optimized for use with Hayes T106 (Semi-Met) or T100 (Sintered) pads to deliver fast, consistent burnish, predictable friction rate, and consistency across temperature and speed conditions
- MRC (Modal Resonance Cancellation): Tuned to cancel resonance and vibration, particularly when paired with Hayes T106 (Semi-Met) and T100 (Sintered) pads
- 1.95mm thickness enhances heat dissipation
- Includes mounting hardware
$174.99
Replacement disc brake calipers for Hayes Dominion hydraulic brake systems.
$209.99
Replacement master cylinder lever assembly for Hayes hydraulic disc brakes.
$249.99
Expanding on our award-winning Dominion A4. Our newest brake, Dominion A2, targets Cross Country and Trail riders. Dominion A2 features a two-piston caliper. Dominion A2 includes all the performance from the Dominion A4, utilizing a compact, two-piston caliper. With the SFL option, the Dominion is the ideal brake option for any rider with smaller hands. Hayes product development team set out to design a brake system specifically designed for a smaller ergonomic profile.
Dominion SFL maintains all the power and feel of our proven Dominion A4, and accomplishes this using a specifically designed smaller and narrower brake lever. Dominion SFL can be used in conjunction with either our Dominion A2 two-piston caliper or our Dominion A4 four-piston caliper. With optional lever sizes and two caliper choices, Dominion from Hayes Disc Brake now offers a brake that's ideal for your application.
Dominion A2 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise.
Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand.
Key Features:
- Tool-Free Reach Adjustment
- Flip-Flop Lever Orientation
- King Pin Pad Retention
- Crosshair Caliper Alignment
- Two-Stroke Dual-port bleed system
Specifications:
- 303g (100cm hose and mount hardware)
- DOT 5.1 Fluid
- Tool-Free Reach Adjustment
- 2-Stroke Dual Port Bleed System
- Sealed Cartridge Bearings Lever Pivot
- 100cm Front Hose Length
- 180cm Rear Hose Length
$249.99
Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop!
Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness.
With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance.
Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise.
Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand.
Key Features:
- Tool-Free Reach Adjustment
- Flip-Flop Lever Orientation
- King Pin Pad Retention
- Crosshair Caliper Alignment
- Two-Stroke Dual-port bleed system
Specifications:
- 310g (100cm hose and mount hardware)
- DOT 5.1 Fluid
- Tool-Free Reach Adjustment
- 2-Stroke Dual Port Bleed System
- Sealed Cartridge Bearings Lever Pivot
- 100cm Front Hose Length
- 180cm Rear Hose Length
$349.99
The best just got better. The limited-edition Hayes Dominion T2 packs the power, sensitivity, and reliability the Dominion family is known for into its lightest chassis yet. Featuring a Reynolds designed and in-house produced carbon-fiber lever, titanium hardware, composite reservoir cover, pads with aluminum backing plates, and precise weight-reducing machining, the T2 is 50g lighter per brake (254g) than the Dominion A2.
Key Features:
- Tooled Reach Adjustment
- Tooled Pad Contact Adjust
- Axial Lever Orientation
- K2 Hose
- Crosshair Caliper Alignment
- Composite lever & reservoir cover, titanium hardware
Specifications:
- Weight: 204g
- DOT 5.1 Fluid
- Tooled Reach Adjustment
- 2-Stroke Dual Port Bleed System
- Sealed Cartridge Bearings Lever Pivot
- 100cm Front Hose Length
- 180cm Rear Hose Length
Page 1 of 1